Reading the clues
Each row and column has a list of numbers. Each number is a run of filled squares, in order, separated by at least one empty square. A clue of “3 1” on a 10-wide row means three filled squares, a gap of at least one, then one filled square — with any number of empty squares around them.
The overlap method
Slide a run as far left as possible, then as far right as possible. Squares covered in both positions must be filled. Example: a single clue of 7 on a 10-square row. Pushed left it covers squares 1–7; pushed right, 4–10. Squares 4–7 are certainly filled.
Mark empty squares
Marking squares you know are empty is just as important as filling. When a row's clue is fully placed, mark the rest empty. Empty marks shorten the space available to other runs and create new overlaps.
Edge logic
- If a filled square touches the edge, the first run must start there. Fill the whole run and mark the square after it empty.
- A filled square near the edge limits how far the first run can extend.
- A gap too small for any remaining run must be empty.
A solving routine
- Do overlaps on the largest clues first (clues that take up most of the line).
- Switch between rows and columns; every new mark helps the crossing lines.
- Mark finished lines empty.
- Look for edge filled squares and small gaps.
A complete line
In a five-cell row with clues 2 2, both runs plus their required gap consume all five cells: fill cells 1–2, mark 3 empty, and fill 4–5. Transfer these facts to the crossing columns before making another placement.
Grid sizes
Start on the smaller grid. Larger grids use the same techniques but need more back-and-forth between rows and columns.
Worked example: overlap in a 10-cell row
A row of 10 with the single clue 7: slide the block as far left as possible (cells 1–7) and as far right (cells 4–10). Cells 4 to 7 are filled in both positions, so fill them now. With clue 3 3 in the same row length, the leftmost and rightmost layouts overlap on fewer cells, so check each block separately.